Fault.........Baxi controller PCB (on 10 year old unit no longer supported by manufacturers repair services)
Determined following specific unit Baxi fault diagnosis manual.
Checked all pins/connections, resistance on valve, continuity of cables..........all within limits. Mains supply correct.
Replaced controller PCB from local supplier with new manufacturers recommended part.
Problem still exists;
Replaced, gas control valve,ignition/thermocouple assembly,new cables, new thermostat. (all new) lots of £££££££s
Problem still exists;
Replaced PCB (again) with new from different supplier.
Hey.....presto.............all working like it was new.
-------------------------------------------------
The problem now...................was the original (new supplied) PCB faulty (quite likely), if so what consumer rights does one have on no returns policies ?
What would be the case for further tests to be carried out on whether it (alleged faulty PCB) can be checked for defects ?
Opinions please.
Determined following specific unit Baxi fault diagnosis manual.
Checked all pins/connections, resistance on valve, continuity of cables..........all within limits. Mains supply correct.
Replaced controller PCB from local supplier with new manufacturers recommended part.
Problem still exists;
Replaced, gas control valve,ignition/thermocouple assembly,new cables, new thermostat. (all new) lots of £££££££s
Problem still exists;
Replaced PCB (again) with new from different supplier.
Hey.....presto.............all working like it was new.
-------------------------------------------------
The problem now...................was the original (new supplied) PCB faulty (quite likely), if so what consumer rights does one have on no returns policies ?
What would be the case for further tests to be carried out on whether it (alleged faulty PCB) can be checked for defects ?
Opinions please.
Comment